1.0.1 - ci-build Denmark flag

KLGatewayMunicipalityCareData - Local Development build (v1.0.1). See the Directory of published versions

Resource Profile: KLGatewayCareCompletedIntervention - Detailed Descriptions

Draft as of 2023-08-21

Definitions for the klgateway-care-completed-intervention resource profile.

Guidance on how to interpret the contents of this table can be found here.

1. Procedure
2. Procedure.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0*
3. Procedure.instantiatesCanonical
Control0..0*
4. Procedure.instantiatesUri
Control0..0*
5. Procedure.basedOn
Control0..0*
6. Procedure.partOf
Control0..0*
7. Procedure.status
8. Procedure.statusReason
Control0..01
9. Procedure.category
Control0..01
10. Procedure.code
Control10..1
11. Procedure.code.coding
Control1..?
SlicingThis element introduces a set of slices on Procedure.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • value @ system
12. Procedure.code.coding:level2
SliceNamelevel2
Control1..1
BindingThe codes SHALL be taken from FSIIICareInterventions
13. Procedure.code.coding:level2.system
Control1..?
Pattern Valuehttp://kl.dk/fhir/common/caresocial/CodeSystem/FSIII
14. Procedure.code.coding:level3
SliceNamelevel3
Definition

Shall contain locally defined code if it is a locally defined level 3 intervention

Control0..1
Must Supporttrue
15. Procedure.code.coding:level3.system
Control1..?
Pattern Valuehttp://gateway.kl.dk/1.0/CodeSystem/LocallyDefinedInterventions
16. Procedure.code.coding:level3.code
Control1..?
17. Procedure.code.coding:level3.display
Control1..?
18. Procedure.subject
TypeReference(KLGatewayCareCitizen|Patient|Group) : {b}
19. Procedure.encounter
Control0..01
20. Procedure.performed[x]
Control10..1
TypeChoice of: , string, Period, Range, Age
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
21. Procedure.recorder
Control0..01
22. Procedure.asserter
Control0..01
23. Procedure.performer
Control0..0*
24. Procedure.location
Control0..01
25. Procedure.reasonCode
Control0..0*
26. Procedure.reasonReference
Definition

Reason for this intervention. Must contain all conditions known to be addressed by this intervention

The justification of why the procedure was performed.

TypeReference(KLGatewayCareCondition|Condition|Observation|Procedure|DiagnosticReport|DocumentReference) : {b}
Must Supporttrue
27. Procedure.bodySite
Control0..0*
28. Procedure.outcome
Control0..01
29. Procedure.report
Control0..0*
30. Procedure.complication
Control0..0*
31. Procedure.complicationDetail
Control0..0*
32. Procedure.followUp
Control0..0*
33. Procedure.note
Control0..0*
34. Procedure.focalDevice
Control0..0*
35. Procedure.usedReference
Control0..0*
36. Procedure.usedCode
Control0..0*

Guidance on how to interpret the contents of this table can be found here.

1. Procedure
Definition

An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

Control0..*
Summaryfalse
InvariantsDefined on this element
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (: text.`div`.exists())
2. Procedure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
3. Procedure.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
4. Procedure.identifier
Definition

Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0*
TypeIdentifier
Summarytrue
Requirements

Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Procedure.instantiatesCanonical
Definition

The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

Control0..0*
Typecanonical(PlanDefinition|ActivityDefinition|Measure|OperationDefinition|Questionnaire)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Procedure.instantiatesUri
Definition

The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

Control0..0*
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Procedure.basedOn
Definition

A reference to a resource that contains details of the request for this procedure.

Control0..0*
TypeReference(CarePlan|ServiceRequest)
Summarytrue
Alternate Namesfulfills
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
8. Procedure.partOf
Definition

A larger event of which this particular procedure is a component or step.

Control0..0*
TypeReference(Procedure|Observation|MedicationAdministration)
Summarytrue
Alternate Namescontainer
Comments

The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
9. Procedure.status
Definition

A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

Control1..1
BindingThe codes SHALL be taken from EventStatus

A code specifying the state of the procedure.

Typecode
Is Modifiertrue
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
10. Procedure.statusReason
Definition

Captures the reason for the current state of the procedure.

Control0..01
BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT)

A code that identifies the reason a procedure was not performed.

TypeCodeableConcept
Summarytrue
Alternate NamesSuspended Reason, Cancelled Reason
Comments

This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Procedure.category
Definition

A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

Control0..01
BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT)

A code that classifies a procedure for searching, sorting and display purposes.

TypeCodeableConcept
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Procedure.code
Definition

The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

Control10..1
BindingFor example codes, see ProcedureCodes(SNOMEDCT)

A code to identify a specific procedure .

TypeCodeableConcept
Summarytrue
Requirements

0..1 to account for primarily narrative only resources.

Alternate Namestype
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Procedure.code.coding
Definition

A reference to a code defined by a terminology system.

Control10..*
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Procedure.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • value @ system
14. Procedure.code.coding:level2
SliceNamelevel2
Definition

A reference to a code defined by a terminology system.

Control10..1*
BindingThe codes SHALL be taken from FSIIICareInterventionsFor codes, see (unbound)
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Procedure.code.coding:level2.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Pattern Valuehttp://kl.dk/fhir/common/caresocial/CodeSystem/FSIII
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Procedure.code.coding:level3
SliceNamelevel3
Definition

Shall contain locally defined code if it is a locally defined level 3 intervention

A reference to a code defined by a terminology system.

Control0..1*
TypeCoding
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. Procedure.code.coding:level3.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control10..1
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Pattern Valuehttp://gateway.kl.dk/1.0/CodeSystem/LocallyDefinedInterventions
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Procedure.code.coding:level3.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control10..1
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
19. Procedure.code.coding:level3.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control10..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
20. Procedure.subject
Definition

The person, animal or group on which the procedure was performed.

Control1..1
TypeReference(KLGatewayCareCitizen|Patient|Group) : {b}
Summarytrue
Alternate Namespatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
21. Procedure.encounter
Definition

The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

Control0..01
TypeReference(Encounter)
Summarytrue
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
22. Procedure.performed[x]
Definition

Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

Control10..1
TypeChoice of: dateTime, string, Period, Range, Age
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Procedure.recorder
Definition

Individual who recorded the record and takes responsibility for its content.

Control0..01
TypeReference(Patient|RelatedPerson|Practitioner|PractitionerRole)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
24. Procedure.asserter
Definition

Individual who is making the procedure statement.

Control0..01
TypeReference(Patient|RelatedPerson|Practitioner|PractitionerRole)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
25. Procedure.performer
Definition

Limited to "real" people rather than equipment.

Control0..0*
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Procedure.location
Definition

The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

Control0..01
TypeReference(Location)
Summarytrue
Requirements

Ties a procedure to where the records are likely kept.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Procedure.reasonCode
Definition

The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

Control0..0*
BindingFor example codes, see ProcedureReasonCodes

A code that identifies the reason a procedure is required.

TypeCodeableConcept
Summarytrue
Comments

Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Procedure.reasonReference
Definition

Reason for this intervention. Must contain all conditions known to be addressed by this intervention

The justification of why the procedure was performed.

Control0..*
TypeReference(KLGatewayCareCondition|Condition|Observation|Procedure|DiagnosticReport|DocumentReference) : {b}
Must Supporttrue
Summarytrue
Comments

It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Procedure.bodySite
Definition

Detailed and structured anatomical location information. Multiple locations are allowed - e.g. multiple punch biopsies of a lesion.

Control0..0*
BindingFor example codes, see SNOMEDCTBodyStructures

Codes describing anatomical locations. May include laterality.

TypeCodeableConcept
Summarytrue
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Procedure.outcome
Definition

The outcome of the procedure - did it resolve the reasons for the procedure being performed?

Control0..01
BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT)

An outcome of a procedure - whether it was resolved or otherwise.

TypeCodeableConcept
Summarytrue
Comments

If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. Procedure.report
Definition

This could be a histology result, pathology report, surgical report, etc.

Control0..0*
TypeReference(DiagnosticReport|DocumentReference|Composition)
Summaryfalse
Comments

There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
32. Procedure.complication
Definition

Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

Control0..0*
BindingFor example codes, see Condition/Problem/DiagnosisCodes

Codes describing complications that resulted from a procedure.

TypeCodeableConcept
Summaryfalse
Comments

If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
33. Procedure.complicationDetail
Definition

Any complications that occurred during the procedure, or in the immediate post-performance period.

Control0..0*
TypeReference(Condition)
Summaryfalse
Requirements

This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Procedure.followUp
Definition

If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

Control0..0*
BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT)

Specific follow up required for a procedure e.g. removal of sutures.

TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Procedure.note
Definition

Any other notes and comments about the procedure.

Control0..0*
TypeAnnotation
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Procedure.focalDevice
Definition

A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

Control0..0*
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Procedure.usedReference
Definition

Identifies medications, devices and any other substance used as part of the procedure.

Control0..0*
TypeReference(Device|Medication|Substance)
Summaryfalse
Requirements

Used for tracking contamination, etc.

Comments

For devices actually implanted or removed, use Procedure.device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Procedure.usedCode
Definition

Identifies coded items that were used as part of the procedure.

Control0..0*
BindingFor example codes, see FHIRDeviceTypes

Codes describing items used during a procedure.

TypeCodeableConcept
Summaryfalse
Comments

For devices actually implanted or removed, use Procedure.device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here.

1. Procedure
Definition

An action that is or was performed on or for a patient. This can be a physical intervention like an operation, or less invasive like long term services, counseling, or hypnotherapy.

Control0..*
Summaryfalse
2. Procedure.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Control0..1
Typeid
Summarytrue
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

3. Procedure.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Control0..1
TypeMeta
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
4. Procedure.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Control0..1
Typeuri
Is Modifiertrue
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
5. Procedure.language
Definition

The base language in which the resource is written.

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages A human language
Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
6. Procedure.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1
TypeNarrative
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
7. Procedure.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

8. Procedure.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
9. Procedure.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Control0..*
TypeExtension
Is Modifiertrue
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
10. Procedure.identifier
Definition

Business identifiers assigned to this procedure by the performer or other systems which remain constant as the resource is updated and is propagated from server to server.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0
TypeIdentifier
Summarytrue
Requirements

Allows identification of the procedure as it is known by various participating systems and in a way that remains consistent across servers.

Comments

This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and Person resource instances might share the same social insurance number.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
11. Procedure.instantiatesCanonical
Definition

The URL pointing to a FHIR-defined protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

Control0..0
Typecanonical(PlanDefinition|ActivityDefinition|Measure|OperationDefinition|Questionnaire)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
12. Procedure.instantiatesUri
Definition

The URL pointing to an externally maintained protocol, guideline, order set or other definition that is adhered to in whole or in part by this Procedure.

Control0..0
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
13. Procedure.basedOn
Definition

A reference to a resource that contains details of the request for this procedure.

Control0..0
TypeReference(CarePlan|ServiceRequest)
Summarytrue
Alternate Namesfulfills
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
14. Procedure.partOf
Definition

A larger event of which this particular procedure is a component or step.

Control0..0
TypeReference(Procedure|Observation|MedicationAdministration)
Summarytrue
Alternate Namescontainer
Comments

The MedicationAdministration resource has a partOf reference to Procedure, but this is not a circular reference. For example, the anesthesia MedicationAdministration is part of the surgical Procedure (MedicationAdministration.partOf = Procedure). For example, the procedure to insert the IV port for an IV medication administration is part of the medication administration (Procedure.partOf = MedicationAdministration).

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
15. Procedure.status
Definition

A code specifying the state of the procedure. Generally, this will be the in-progress or completed state.

Control1..1
BindingThe codes SHALL be taken from EventStatus A code specifying the state of the procedure
Typecode
Is Modifiertrue
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

The "unknown" code is not to be used to convey other statuses. The "unknown" code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the procedure.

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
16. Procedure.statusReason
Definition

Captures the reason for the current state of the procedure.

Control0..0
BindingFor example codes, see ProcedureNotPerformedReason(SNOMED-CT) A code that identifies the reason a procedure was not performed
TypeCodeableConcept
Summarytrue
Alternate NamesSuspended Reason, Cancelled Reason
Comments

This is generally only used for "exception" statuses such as "not-done", "suspended" or "aborted". The reason for performing the event at all is captured in reasonCode, not here.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
17. Procedure.category
Definition

A code that classifies the procedure for searching, sorting and display purposes (e.g. "Surgical Procedure").

Control0..0
BindingFor example codes, see ProcedureCategoryCodes(SNOMEDCT) A code that classifies a procedure for searching, sorting and display purposes
TypeCodeableConcept
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
18. Procedure.code
Definition

The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy").

Control1..1
BindingFor example codes, see ProcedureCodes(SNOMEDCT) A code to identify a specific procedure
TypeCodeableConcept
Summarytrue
Requirements

0..1 to account for primarily narrative only resources.

Alternate Namestype
19. Procedure.code.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
20. Procedure.code.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Procedure.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
21. Procedure.code.coding
Definition

A reference to a code defined by a terminology system.

Control1..*
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Procedure.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • value @ system
22. Procedure.code.coding:level2
SliceNamelevel2
Definition

A reference to a code defined by a terminology system.

Control1..1
BindingThe codes SHALL be taken from FSIIICareInterventions
TypeCoding
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
23. Procedure.code.coding:level2.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
24. Procedure.code.coding:level2.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Procedure.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
25. Procedure.code.coding:level2.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Pattern Valuehttp://kl.dk/fhir/common/caresocial/CodeSystem/FSIII
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
26. Procedure.code.coding:level2.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
27. Procedure.code.coding:level2.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control0..1
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
28. Procedure.code.coding:level2.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
29. Procedure.code.coding:level2.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
30. Procedure.code.coding:level3
SliceNamelevel3
Definition

Shall contain locally defined code if it is a locally defined level 3 intervention

Control0..1
TypeCoding
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
31. Procedure.code.coding:level3.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Control0..1
Typestring
XML RepresentationIn the XML format, this property is represented as an attribute.
Summaryfalse
32. Procedure.code.coding:level3.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Summaryfalse
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Procedure.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
33. Procedure.code.coding:level3.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Pattern Valuehttp://gateway.kl.dk/1.0/CodeSystem/LocallyDefinedInterventions
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
34. Procedure.code.coding:level3.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
35. Procedure.code.coding:level3.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
36. Procedure.code.coding:level3.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control1..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
37. Procedure.code.coding:level3.userSelected
Definition

Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
38. Procedure.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
39. Procedure.subject
Definition

The person, animal or group on which the procedure was performed.

Control1..1
TypeReference(KLGatewayCareCitizen) : {b}
Summarytrue
Alternate Namespatient
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
40. Procedure.encounter
Definition

The Encounter during which this Procedure was created or performed or to which the creation of this record is tightly associated.

Control0..0
TypeReference(Encounter)
Summarytrue
Comments

This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
41. Procedure.performed[x]
Definition

Estimated or actual date, date-time, period, or age when the procedure was performed. Allows a period to support complex procedures that span more than one date, and also allows for the length of the procedure to be captured.

Control1..1
TypedateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Comments

Age is generally used when the patient reports an age at which the procedure was performed. Range is generally used when the patient reports an age range when the procedure was performed, such as sometime between 20-25 years old. dateTime supports a range of precision due to some procedures being reported as past procedures that might not have millisecond precision while other procedures performed and documented during the encounter might have more precise UTC timestamps with timezone.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
42. Procedure.recorder
Definition

Individual who recorded the record and takes responsibility for its content.

Control0..0
TypeReference(Patient|RelatedPerson|Practitioner|PractitionerRole)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
43. Procedure.asserter
Definition

Individual who is making the procedure statement.

Control0..0
TypeReference(Patient|RelatedPerson|Practitioner|PractitionerRole)
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
44. Procedure.performer
Definition

Limited to "real" people rather than equipment.

Control0..0
TypeBackboneElement
Summarytrue
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
45. Procedure.location
Definition

The location where the procedure actually happened. E.g. a newborn at home, a tracheostomy at a restaurant.

Control0..0
TypeReference(Location)
Summarytrue
Requirements

Ties a procedure to where the records are likely kept.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
46. Procedure.reasonCode
Definition

The coded reason why the procedure was performed. This may be a coded entity of some type, or may simply be present as text.

Control0..0
BindingFor example codes, see ProcedureReasonCodes A code that identifies the reason a procedure is required
TypeCodeableConcept
Summarytrue
Comments

Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
47. Procedure.reasonReference
Definition

Reason for this intervention. Must contain all conditions known to be addressed by this intervention

Control0..*
TypeReference(KLGatewayCareCondition) : {b}
Must Supporttrue
Summarytrue
Comments

It is possible for a procedure to be a reason (such as C-Section) for another procedure (such as an epidural). Other examples include endoscopy for dilatation and biopsy (a combination of diagnostic and therapeutic use). Use Procedure.reasonCode when a code sufficiently describes the reason. Use Procedure.reasonReference when referencing a resource, which allows more information to be conveyed, such as onset date. Procedure.reasonCode and Procedure.reasonReference are not meant to be duplicative. For a single reason, either Procedure.reasonCode or Procedure.reasonReference can be used. Procedure.reasonCode may be a summary code, or Procedure.reasonReference may be used to reference a very precise definition of the reason using Condition | Observation | Procedure | DiagnosticReport | DocumentReference. Both Procedure.reasonCode and Procedure.reasonReference can be used if they are describing different reasons for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
48. Procedure.bodySite
Definition

Detailed and structured anatomical location information. Multiple locations are allowed - e.g. multiple punch biopsies of a lesion.

Control0..0
BindingFor example codes, see SNOMEDCTBodyStructures Codes describing anatomical locations. May include laterality
TypeCodeableConcept
Summarytrue
Comments

If the use case requires attributes from the BodySite resource (e.g. to identify and track separately) then use the standard extension procedure-targetbodystructure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
49. Procedure.outcome
Definition

The outcome of the procedure - did it resolve the reasons for the procedure being performed?

Control0..0
BindingFor example codes, see ProcedureOutcomeCodes(SNOMEDCT) An outcome of a procedure - whether it was resolved or otherwise
TypeCodeableConcept
Summarytrue
Comments

If outcome contains narrative text only, it can be captured using the CodeableConcept.text.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
50. Procedure.report
Definition

This could be a histology result, pathology report, surgical report, etc.

Control0..0
TypeReference(DiagnosticReport|DocumentReference|Composition)
Summaryfalse
Comments

There could potentially be multiple reports - e.g. if this was a procedure which took multiple biopsies resulting in a number of anatomical pathology reports.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
51. Procedure.complication
Definition

Any complications that occurred during the procedure, or in the immediate post-performance period. These are generally tracked separately from the notes, which will typically describe the procedure itself rather than any 'post procedure' issues.

Control0..0
BindingFor example codes, see Condition/Problem/DiagnosisCodes Codes describing complications that resulted from a procedure
TypeCodeableConcept
Summaryfalse
Comments

If complications are only expressed by the narrative text, they can be captured using the CodeableConcept.text.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
52. Procedure.complicationDetail
Definition

Any complications that occurred during the procedure, or in the immediate post-performance period.

Control0..0
TypeReference(Condition)
Summaryfalse
Requirements

This is used to document a condition that is a result of the procedure, not the condition that was the reason for the procedure.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
53. Procedure.followUp
Definition

If the procedure required specific follow up - e.g. removal of sutures. The follow up may be represented as a simple note or could potentially be more complex, in which case the CarePlan resource can be used.

Control0..0
BindingFor example codes, see ProcedureFollowUpCodes(SNOMEDCT) Specific follow up required for a procedure e.g. removal of sutures
TypeCodeableConcept
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
54. Procedure.note
Definition

Any other notes and comments about the procedure.

Control0..0
TypeAnnotation
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
55. Procedure.focalDevice
Definition

A device that is implanted, removed or otherwise manipulated (calibration, battery replacement, fitting a prosthesis, attaching a wound-vac, etc.) as a focal portion of the Procedure.

Control0..0
TypeBackboneElement
Summaryfalse
InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
56. Procedure.usedReference
Definition

Identifies medications, devices and any other substance used as part of the procedure.

Control0..0
TypeReference(Device|Medication|Substance)
Summaryfalse
Requirements

Used for tracking contamination, etc.

Comments

For devices actually implanted or removed, use Procedure.device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))
57. Procedure.usedCode
Definition

Identifies coded items that were used as part of the procedure.

Control0..0
BindingFor example codes, see FHIRDeviceTypes Codes describing items used during a procedure
TypeCodeableConcept
Summaryfalse
Comments

For devices actually implanted or removed, use Procedure.device.

InvariantsDefined on this element
ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count()))