KLChildren implementation guide, an implementation of FBU
2.0.0 - Release

This page is part of the KLChildren (v2.0.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: KLGatewayChildrenRelatedParent - Detailed Descriptions

Active as of 2024-06-05

Definitions for the klgateway-children-related-parent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. RelatedPerson
2. RelatedPerson.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0
4. RelatedPerson.identifier:cpr
Slice Namecpr
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0
6. RelatedPerson.identifier:x-ecpr
Slice Namex-ecpr
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0
8. RelatedPerson.identifier:d-ecpr
Slice Named-ecpr
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0
10. RelatedPerson.active
Short[DK] harAktivJournal
12. RelatedPerson.patient
Short[DK] harBarn
TypeReference(KLGatewayChildrenCitizen)bundled
14. RelatedPerson.relationship
Short[DK] type
BindingThe codes SHALL be taken from ForælderTyper
(required to http://fhir.kl.dk/children/ValueSet/ParentTypes)
16. RelatedPerson.name
Control0..0
18. RelatedPerson.name:official
Slice Nameofficial
Control0..0
20. RelatedPerson.telecom
Control0..0
22. RelatedPerson.gender
Control0..0
24. RelatedPerson.birthDate
Control0..0
26. RelatedPerson.address
Control0..0
28. RelatedPerson.photo
Control0..0
30. RelatedPerson.period
Control0..0
32. RelatedPerson.communication
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. RelatedPerson
Definition

Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. RelatedPerson.identifier
Definition

Identifier for a person within a particular scope.

ShortA human identifier for this person
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..0*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on RelatedPerson.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ system
  • 8. RelatedPerson.identifier:cpr
    Slice Namecpr
    Definition

    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


    Identifier for a person within a particular scope.

    ShortAn identifier intended for computationA human identifier for this person
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..0*
    This element is affected by the following invariants: ele-1
    TypeIdentifier(Danish Central Person Register (CPR) Identifier)
    Is Modifierfalse
    Requirements

    People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. RelatedPerson.identifier:x-ecpr
    Slice Namex-ecpr
    Definition

    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


    Identifier for a person within a particular scope.

    ShortAn identifier intended for computationA human identifier for this person
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..0*
    This element is affected by the following invariants: ele-1
    TypeIdentifier(National eCPR service, called X-eCPR)
    Is Modifierfalse
    Requirements

    People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. RelatedPerson.identifier:d-ecpr
    Slice Named-ecpr
    Definition

    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


    Identifier for a person within a particular scope.

    ShortAn identifier intended for computationA human identifier for this person
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..0*
    This element is affected by the following invariants: ele-1
    TypeIdentifier(Decentralised eCPR, called D-eCPR)
    Is Modifierfalse
    Requirements

    People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. RelatedPerson.active
    Definition

    Whether this related person record is in active use.

    Short[DK] harAktivJournalWhether this related person's record is in active use
    Comments

    This element is labeled as a modifier because it may be used to mark that the resource was created in error.

    Control0..1
    Typeboolean
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be able to mark a related person record as not to be used, such as if it was created in error.

    Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. RelatedPerson.patient
    Definition

    The patient this person is related to.

    Short[DK] harBarnThe patient this person is related to
    Control1..1
    TypeReference(KLGatewayChildrenCitizen, Patient)bundled
    Is Modifierfalse
    Summarytrue
    Requirements

    We need to know which patient this RelatedPerson is related to.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. RelatedPerson.relationship
    Definition

    The nature of the relationship between a patient and the related person.

    Short[DK] typeThe nature of the relationship
    Control0..*
    BindingThe codes SHALL be taken from The codes SHOULD be taken from ForælderTyperhttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype
    (required to http://fhir.kl.dk/children/ValueSet/ParentTypes)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. RelatedPerson.name
    Definition

    A name associated with the person.

    ShortA name associated with the person
    Control0..0*
    TypeHumanName
    Is Modifierfalse
    Summarytrue
    Requirements

    Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on RelatedPerson.name. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ use
    • 22. RelatedPerson.name:official
      Slice Nameofficial
      Definition

      A name associated with the person.

      Short[DA] Officielt navn, som det fremgår af CPR registeretA name associated with the person
      Control0..0*
      TypeHumanName
      Is Modifierfalse
      Summarytrue
      Requirements

      Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. RelatedPerson.telecom
      Definition

      A contact detail for the person, e.g. a telephone number or an email address.

      ShortA contact detail for the person
      Comments

      Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

      Control0..0*
      TypeContactPoint
      Is Modifierfalse
      Summarytrue
      Requirements

      People have (primary) ways to contact them in some way such as phone, email.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. RelatedPerson.gender
      Definition

      Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

      Shortmale | female | other | unknown
      Control0..01
      BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
      (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

      The gender of a person used for administrative purposes.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Needed for identification of the person, in combination with (at least) name and birth date.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. RelatedPerson.birthDate
      Definition

      The date on which the related person was born.

      ShortThe date on which the related person was born
      Control0..01
      Typedate
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      32. RelatedPerson.address
      Definition

      Address where the related person can be contacted or visited.

      ShortAddress where the related person can be contacted or visited
      Control0..0*
      TypeAddress
      Is Modifierfalse
      Summarytrue
      Requirements

      Need to keep track where the related person can be contacted per postal mail or visited.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. RelatedPerson.photo
      Definition

      Image of the person.

      ShortImage of the person
      Control0..0*
      TypeAttachment
      Is Modifierfalse
      Summaryfalse
      Requirements

      Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. RelatedPerson.period
      Definition

      The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

      ShortPeriod of time that this relationship is considered valid
      Control0..01
      TypePeriod
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. RelatedPerson.communication
      Definition

      A language which may be used to communicate with about the patient's health.

      ShortA language which may be used to communicate with about the patient's health
      Comments

      If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

      Control0..0*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Requirements

      If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. RelatedPerson
      Definition

      Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

      ShortA person that is related to a patient, but who is not a direct target of care
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. RelatedPerson.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. RelatedPerson.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. RelatedPerson.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. RelatedPerson.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. RelatedPerson.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. RelatedPerson.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. RelatedPerson.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. RelatedPerson.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. RelatedPerson.identifier
      Definition

      Identifier for a person within a particular scope.

      ShortA human identifier for this person
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..0
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on RelatedPerson.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 20. RelatedPerson.identifier:cpr
        Slice Namecpr
        Definition

        An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

        ShortAn identifier intended for computation
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..0
        This element is affected by the following invariants: ele-1
        TypeIdentifier(Danish Central Person Register (CPR) Identifier)
        Is Modifierfalse
        Requirements

        People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. RelatedPerson.identifier:x-ecpr
        Slice Namex-ecpr
        Definition

        An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

        ShortAn identifier intended for computation
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..0
        This element is affected by the following invariants: ele-1
        TypeIdentifier(National eCPR service, called X-eCPR)
        Is Modifierfalse
        Requirements

        People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. RelatedPerson.identifier:d-ecpr
        Slice Named-ecpr
        Definition

        An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

        ShortAn identifier intended for computation
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..0
        This element is affected by the following invariants: ele-1
        TypeIdentifier(Decentralised eCPR, called D-eCPR)
        Is Modifierfalse
        Requirements

        People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. RelatedPerson.active
        Definition

        Whether this related person record is in active use.

        Short[DK] harAktivJournal
        Comments

        This element is labeled as a modifier because it may be used to mark that the resource was created in error.

        Control0..1
        Typeboolean
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a related person record as not to be used, such as if it was created in error.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. RelatedPerson.patient
        Definition

        The patient this person is related to.

        Short[DK] harBarn
        Control1..1
        TypeReference(KLGatewayChildrenCitizen)bundled
        Is Modifierfalse
        Summarytrue
        Requirements

        We need to know which patient this RelatedPerson is related to.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. RelatedPerson.relationship
        Definition

        The nature of the relationship between a patient and the related person.

        Short[DK] type
        Control0..*
        BindingThe codes SHALL be taken from ForælderTyper
        (required to http://fhir.kl.dk/children/ValueSet/ParentTypes)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. RelatedPerson.name
        Definition

        A name associated with the person.

        ShortA name associated with the person
        Control0..0
        TypeHumanName
        Is Modifierfalse
        Summarytrue
        Requirements

        Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on RelatedPerson.name. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ use
        • 34. RelatedPerson.name:official
          Slice Nameofficial
          Definition

          A name associated with the person.

          Short[DA] Officielt navn, som det fremgår af CPR registeret
          Control0..0
          TypeHumanName
          Is Modifierfalse
          Summarytrue
          Requirements

          Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          45. RelatedPerson.telecom
          Definition

          A contact detail for the person, e.g. a telephone number or an email address.

          ShortA contact detail for the person
          Comments

          Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

          Control0..0
          TypeContactPoint
          Is Modifierfalse
          Summarytrue
          Requirements

          People have (primary) ways to contact them in some way such as phone, email.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          47. RelatedPerson.gender
          Definition

          Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

          Shortmale | female | other | unknown
          Control0..0
          BindingThe codes SHALL be taken from AdministrativeGender
          (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

          The gender of a person used for administrative purposes.

          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Needed for identification of the person, in combination with (at least) name and birth date.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          49. RelatedPerson.birthDate
          Definition

          The date on which the related person was born.

          ShortThe date on which the related person was born
          Control0..0
          Typedate
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          51. RelatedPerson.address
          Definition

          Address where the related person can be contacted or visited.

          ShortAddress where the related person can be contacted or visited
          Control0..0
          TypeAddress
          Is Modifierfalse
          Summarytrue
          Requirements

          Need to keep track where the related person can be contacted per postal mail or visited.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          53. RelatedPerson.photo
          Definition

          Image of the person.

          ShortImage of the person
          Control0..0
          TypeAttachment
          Is Modifierfalse
          Summaryfalse
          Requirements

          Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          55. RelatedPerson.period
          Definition

          The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

          ShortPeriod of time that this relationship is considered valid
          Control0..0
          TypePeriod
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          57. RelatedPerson.communication
          Definition

          A language which may be used to communicate with about the patient's health.

          ShortA language which may be used to communicate with about the patient's health
          Comments

          If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

          Control0..0
          TypeBackboneElement
          Is Modifierfalse
          Summaryfalse
          Requirements

          If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))