1.1.0 - release
This page is part of the KL Gateway (v1.1.0: Release) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Active as of 2023-06-21 |
Definitions for the klgateway-care-planned-intervention resource profile.
Guidance on how to interpret the contents of this table can be found here.
1. CarePlan | |
2. CarePlan.extension | |
Slicing | This element introduces a set of slices on CarePlan.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
3. CarePlan.extension:followUpEncounter | |
SliceName | followUpEncounter |
Definition | Encounter for following up on this intervention. Must be present if a follow-up date is known |
Control | 0..1 |
Type | Extension(KLGatewayCareFollowUpEncounterExtension) (Extension Type: Reference(KLGatewayCareEncounter) : {b}) |
Must Support | true |
4. CarePlan.identifier | |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..0* |
5. CarePlan.instantiatesCanonical | |
Control | 0..0* |
6. CarePlan.instantiatesUri | |
Control | 0..0* |
7. CarePlan.basedOn | |
Control | 0..0* |
8. CarePlan.replaces | |
Control | 0..0* |
9. CarePlan.partOf | |
Control | 0..0* |
10. CarePlan.status | |
Definition | Shall be either unknown, entered-in-error, or the status of the intervention at the time of reporting Indicates whether the plan is currently being acted upon, represents future intentions or is now a historical record. |
11. CarePlan.intent | |
Pattern Value | plan |
12. CarePlan.category | |
Control | 0..0* |
13. CarePlan.title | |
Control | 0..01 |
14. CarePlan.description | |
Control | 0..01 |
15. CarePlan.subject | |
Type | Reference(KLGatewayCareCitizen|Patient|Group) : {b} |
16. CarePlan.encounter | |
Control | 0..01 |
17. CarePlan.period | |
Control | 10..1 |
18. CarePlan.period.start | |
Control | 1..? |
19. CarePlan.period.end | |
Control | 0..? |
20. CarePlan.created | |
Control | 0..01 |
21. CarePlan.author | |
Control | 0..01 |
22. CarePlan.contributor | |
Control | 0..0* |
23. CarePlan.careTeam | |
Control | 0..0* |
24. CarePlan.addresses | |
Control | 0..0* |
25. CarePlan.supportingInfo | |
Control | 0..0* |
26. CarePlan.goal | |
Control | 0..0* |
27. CarePlan.activity | |
Control | 10..1* |
28. CarePlan.activity.outcomeCodeableConcept | |
Control | 0..0* |
29. CarePlan.activity.outcomeReference | |
Control | 0..0* |
30. CarePlan.activity.progress | |
Control | 0..0* |
31. CarePlan.activity.reference | |
Control | 0..01 |
32. CarePlan.activity.detail | |
Control | 10..1 |
33. CarePlan.activity.detail.kind | |
Control | 0..01 |
34. CarePlan.activity.detail.instantiatesCanonical | |
Control | 0..0* |
35. CarePlan.activity.detail.instantiatesUri | |
Control | 0..0* |
36. CarePlan.activity.detail.code | |
Control | 10..1 |
37. CarePlan.activity.detail.code.coding | |
Control | 1..? |
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
|
38. CarePlan.activity.detail.code.coding:level2 | |
SliceName | level2 |
Control | 1..1 |
Binding | The codes SHALL be taken from FSIIICareInterventions |
39. CarePlan.activity.detail.code.coding:level2.system | |
Control | 1..? |
Pattern Value | urn:oid:1.2.208.176.2.21 |
40. CarePlan.activity.detail.code.coding:level3 | |
SliceName | level3 |
Definition | Shall contain locally defined code if it is a locally defined level 3 intervention |
Control | 0..1 |
Must Support | true |
41. CarePlan.activity.detail.code.coding:level3.system | |
Control | 1..? |
Pattern Value | http://fhir.kl.dk/gateway/CodeSystem/LocallyDefinedInterventions |
42. CarePlan.activity.detail.code.coding:level3.code | |
Control | 1..? |
43. CarePlan.activity.detail.code.coding:level3.display | |
Control | 1..? |
44. CarePlan.activity.detail.reasonCode | |
Control | 0..0* |
45. CarePlan.activity.detail.reasonReference | |
Definition | Reason for this intervention. Must contain all conditions known to be addressed by this intervention Indicates another resource, such as the health condition(s), whose existence justifies this request and drove the inclusion of this particular activity as part of the plan. |
Type | Reference(KLGatewayCareCondition|Condition|Observation|DiagnosticReport|DocumentReference) : {b} |
Must Support | true |
46. CarePlan.activity.detail.goal | |
Control | 0..0* |
47. CarePlan.activity.detail.status | |
Definition | Shall be either unknown, entered-in-error, or the activity status of the intervention at the time of reporting Identifies what progress is being made for the specific activity. |
48. CarePlan.activity.detail.statusReason | |
Control | 0..01 |
49. CarePlan.activity.detail.doNotPerform | |
Control | 0..01 |
50. CarePlan.activity.detail.scheduled[x] | |
Control | 0..01 |
[x] Note | See Choice of Data Types for further information about how to use [x] |
51. CarePlan.activity.detail.location | |
Control | 0..01 |
52. CarePlan.activity.detail.performer | |
Control | 0..0* |
53. CarePlan.activity.detail.product[x] | |
Control | 0..01 |
[x] Note | See Choice of Data Types for further information about how to use [x] |
54. CarePlan.activity.detail.dailyAmount | |
Control | 0..01 |
55. CarePlan.activity.detail.quantity | |
Control | 0..01 |
56. CarePlan.activity.detail.description | |
Control | 0..01 |
57. CarePlan.note | |
Control | 0..0* |
Guidance on how to interpret the contents of this table can be found here.
1. CarePlan | |||
Definition | Describes the intention of how one or more practitioners intend to deliver care for a particular patient, group or community for a period of time, possibly limited to care for a specific condition or set of conditions. | ||
Control | 0..* | ||
Summary | false | ||
Alternate Names | Care Team | ||
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) | ||
2. CarePlan.implicitRules | |||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||
Control | 0..1 | ||
Type | uri | ||
Is Modifier | true | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
3. CarePlan.extension | |||
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||
Control | 0..* | ||
Type | Extension | ||
Summary | false | ||
Alternate Names | extensions, user content | ||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||
Slicing | This element introduces a set of slices on CarePlan.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||
4. CarePlan.extension:followUpEncounter | |||
SliceName | followUpEncounter | ||
Definition | Encounter for following up on this intervention. Must be present if a follow-up date is known | ||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||
Type | Extension(KLGatewayCareFollowUpEncounterExtension) (Extension Type: Reference(KLGatewayCareEncounter) : {b}) | ||
Must Support | true | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||
5. CarePlan.modifierExtension | |||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||
Control | 0..* | ||
Type | Extension | ||
Is Modifier | true | ||
Summary | false | ||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||
Alternate Names | extensions, user content | ||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||
6. CarePlan.identifier | |||
Definition | Business identifiers assigned to this care plan by the performer or other systems which remain constant as the resource is updated and propagates from server to server. | ||
Note | This is a business identifier, not a resource identifier (see discussion) | ||
Control | 0..0* | ||
Type | Identifier | ||
Summary | true | ||
Requirements | Allows identification of the care plan as it is known by various participating systems and in a way that remains consistent across servers. | ||
Comments | This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
7. CarePlan.instantiatesCanonical | |||
Definition | The URL pointing to a FHIR-defined protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan. | ||
Control | 0..0* | ||
Type | canonical(PlanDefinition|Questionnaire|Measure|ActivityDefinition|OperationDefinition) | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
8. CarePlan.instantiatesUri | |||
Definition | The URL pointing to an externally maintained protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan. | ||
Control | 0..0* | ||
Type | uri | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Comments | This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
9. CarePlan.basedOn | |||
Definition | A care plan that is fulfilled in whole or in part by this care plan. | ||
Control | 0..0* | ||
Type | Reference(CarePlan) | ||
Summary | true | ||
Requirements | Allows tracing of the care plan and tracking whether proposals/recommendations were acted upon. | ||
Alternate Names | fulfills | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
10. CarePlan.replaces | |||
Definition | Completed or terminated care plan whose function is taken by this new care plan. | ||
Control | 0..0* | ||
Type | Reference(CarePlan) | ||
Summary | true | ||
Requirements | Allows tracing the continuation of a therapy or administrative process instantiated through multiple care plans. | ||
Alternate Names | supersedes | ||
Comments | The replacement could be because the initial care plan was immediately rejected (due to an issue) or because the previous care plan was completed, but the need for the action described by the care plan remains ongoing. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
11. CarePlan.partOf | |||
Definition | A larger care plan of which this particular care plan is a component or step. | ||
Control | 0..0* | ||
Type | Reference(CarePlan) | ||
Summary | true | ||
Comments | Each care plan is an independent request, such that having a care plan be part of another care plan can cause issues with cascading statuses. As such, this element is still being discussed. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
12. CarePlan.status | |||
Definition | Shall be either unknown, entered-in-error, or the status of the intervention at the time of reporting Indicates whether the plan is currently being acted upon, represents future intentions or is now a historical record. | ||
Control | 1..1 | ||
Binding | The codes SHALL be taken from RequestStatus Indicates whether the plan is currently being acted upon, represents future intentions or is now a historical record. | ||
Type | code | ||
Is Modifier | true | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Allows clinicians to determine whether the plan is actionable or not. | ||
Comments | The unknown code is not to be used to convey other statuses. The unknown code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the care plan. This element is labeled as a modifier because the status contains the code entered-in-error that marks the plan as not currently valid. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
13. CarePlan.intent | |||
Definition | Indicates the level of authority/intentionality associated with the care plan and where the care plan fits into the workflow chain. | ||
Control | 1..1 | ||
Binding | The codes SHALL be taken from CarePlanIntent Codes indicating the degree of authority/intentionality associated with a care plan. | ||
Type | code | ||
Is Modifier | true | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Proposals/recommendations, plans and orders all use the same structure and can exist in the same fulfillment chain. | ||
Comments | This element is labeled as a modifier because the intent alters when and how the resource is actually applicable. | ||
Pattern Value | plan | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
14. CarePlan.category | |||
Definition | Identifies what "kind" of plan this is to support differentiation between multiple co-existing plans; e.g. "Home health", "psychiatric", "asthma", "disease management", "wellness plan", etc. | ||
Control | 0..0* | ||
Binding | For example codes, see CarePlanCategory Identifies what "kind" of plan this is to support differentiation between multiple co-existing plans; e.g. "Home health", "psychiatric", "asthma", "disease management", etc. | ||
Type | CodeableConcept | ||
Summary | true | ||
Requirements | Used for filtering what plan(s) are retrieved and displayed to different types of users. | ||
Comments | There may be multiple axes of categorization and one plan may serve multiple purposes. In some cases, this may be redundant with references to CarePlan.concern. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
15. CarePlan.title | |||
Definition | Human-friendly name for the care plan. | ||
Control | 0..01 | ||
Type | string | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
16. CarePlan.description | |||
Definition | A description of the scope and nature of the plan. | ||
Control | 0..01 | ||
Type | string | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Provides more detail than conveyed by category. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
17. CarePlan.subject | |||
Definition | Identifies the patient or group whose intended care is described by the plan. | ||
Control | 1..1 | ||
Type | Reference(KLGatewayCareCitizen|Patient|Group) : {b} | ||
Summary | true | ||
Alternate Names | patient | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
18. CarePlan.encounter | |||
Definition | The Encounter during which this CarePlan was created or to which the creation of this record is tightly associated. | ||
Control | 0..01 | ||
Type | Reference(Encounter) | ||
Summary | true | ||
Comments | This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. CarePlan activities conducted as a result of the care plan may well occur as part of other encounters. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
19. CarePlan.period | |||
Definition | Indicates when the plan did (or is intended to) come into effect and end. | ||
Control | 10..1 | ||
Type | Period | ||
Summary | true | ||
Requirements | Allows tracking what plan(s) are in effect at a particular time. | ||
Alternate Names | timing | ||
Comments | Any activities scheduled as part of the plan should be constrained to the specified period regardless of whether the activities are planned within a single encounter/episode or across multiple encounters/episodes (e.g. the longitudinal management of a chronic condition). | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
20. CarePlan.period.start | |||
Definition | The start of the period. The boundary is inclusive. | ||
Control | 10..1 This element is affected by the following invariants: per-1 | ||
Type | dateTime | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Comments | If the low element is missing, the meaning is that the low boundary is not known. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
21. CarePlan.period.end | |||
Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. | ||
Control | 0..1 This element is affected by the following invariants: per-1 | ||
Type | dateTime | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. | ||
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
22. CarePlan.created | |||
Definition | Represents when this particular CarePlan record was created in the system, which is often a system-generated date. | ||
Control | 0..01 | ||
Type | dateTime | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Alternate Names | authoredOn | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
23. CarePlan.author | |||
Definition | When populated, the author is responsible for the care plan. The care plan is attributed to the author. | ||
Control | 0..01 | ||
Type | Reference(Patient|Practitioner|PractitionerRole|Device|RelatedPerson|Organization|CareTeam) | ||
Summary | true | ||
Comments | The author may also be a contributor. For example, an organization can be an author, but not listed as a contributor. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
24. CarePlan.contributor | |||
Definition | Identifies the individual(s) or organization who provided the contents of the care plan. | ||
Control | 0..0* | ||
Type | Reference(Patient|Practitioner|PractitionerRole|Device|RelatedPerson|Organization|CareTeam) | ||
Summary | false | ||
Comments | Collaborative care plans may have multiple contributors. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
25. CarePlan.careTeam | |||
Definition | Identifies all people and organizations who are expected to be involved in the care envisioned by this plan. | ||
Control | 0..0* | ||
Type | Reference(CareTeam) | ||
Summary | false | ||
Requirements | Allows representation of care teams, helps scope care plan. In some cases may be a determiner of access permissions. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
26. CarePlan.addresses | |||
Definition | Identifies the conditions/problems/concerns/diagnoses/etc. whose management and/or mitigation are handled by this plan. | ||
Control | 0..0* | ||
Type | Reference(Condition) | ||
Summary | true | ||
Requirements | Links plan to the conditions it manages. The element can identify risks addressed by the plan as well as active conditions. (The Condition resource can include things like "at risk for hypertension" or "fall risk".) Also scopes plans - multiple plans may exist addressing different concerns. | ||
Comments | When the diagnosis is related to an allergy or intolerance, the Condition and AllergyIntolerance resources can both be used. However, to be actionable for decision support, using Condition alone is not sufficient as the allergy or intolerance condition needs to be represented as an AllergyIntolerance. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
27. CarePlan.supportingInfo | |||
Definition | Identifies portions of the patient's record that specifically influenced the formation of the plan. These might include comorbidities, recent procedures, limitations, recent assessments, etc. | ||
Control | 0..0* | ||
Type | Reference(Resource) | ||
Summary | false | ||
Requirements | Identifies barriers and other considerations associated with the care plan. | ||
Comments | Use "concern" to identify specific conditions addressed by the care plan. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
28. CarePlan.goal | |||
Definition | Describes the intended objective(s) of carrying out the care plan. | ||
Control | 0..0* | ||
Type | Reference(Goal) | ||
Summary | false | ||
Requirements | Provides context for plan. Allows plan effectiveness to be evaluated by clinicians. | ||
Comments | Goal can be achieving a particular change or merely maintaining a current state or even slowing a decline. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
29. CarePlan.activity | |||
Definition | Identifies a planned action to occur as part of the plan. For example, a medication to be used, lab tests to perform, self-monitoring, education, etc. | ||
Control | 10..1* | ||
Type | BackboneElement | ||
Summary | false | ||
Requirements | Allows systems to prompt for performance of planned activities, and validate plans against best practice. | ||
Invariants | Defined on this element cpl-3: Provide a reference or detail, not both (: detail.empty() or reference.empty()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
30. CarePlan.activity.modifierExtension | |||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||
Control | 0..* | ||
Type | Extension | ||
Is Modifier | true | ||
Summary | true | ||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||
Alternate Names | extensions, user content, modifiers | ||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||
31. CarePlan.activity.outcomeCodeableConcept | |||
Definition | Identifies the outcome at the point when the status of the activity is assessed. For example, the outcome of an education activity could be patient understands (or not). | ||
Control | 0..0* | ||
Binding | For example codes, see CarePlanActivityOutcome Identifies the results of the activity. | ||
Type | CodeableConcept | ||
Summary | false | ||
Comments | Note that this should not duplicate the activity status (e.g. completed or in progress). | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
32. CarePlan.activity.outcomeReference | |||
Definition | Details of the outcome or action resulting from the activity. The reference to an "event" resource, such as Procedure or Encounter or Observation, is the result/outcome of the activity itself. The activity can be conveyed using CarePlan.activity.detail OR using the CarePlan.activity.reference (a reference to a “request” resource). | ||
Control | 0..0* | ||
Type | Reference(Resource) | ||
Summary | false | ||
Requirements | Links plan to resulting actions. | ||
Comments | The activity outcome is independent of the outcome of the related goal(s). For example, if the goal is to achieve a target body weight of 150 lbs and an activity is defined to diet, then the activity outcome could be calories consumed whereas the goal outcome is an observation for the actual body weight measured. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
33. CarePlan.activity.progress | |||
Definition | Notes about the adherence/status/progress of the activity. | ||
Control | 0..0* | ||
Type | Annotation | ||
Summary | false | ||
Requirements | Can be used to capture information about adherence, progress, concerns, etc. | ||
Comments | This element should NOT be used to describe the activity to be performed - that occurs either within the resource pointed to by activity.detail.reference or in activity.detail.description. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
34. CarePlan.activity.reference | |||
Definition | The details of the proposed activity represented in a specific resource. | ||
Control | 0..01 This element is affected by the following invariants: cpl-3 | ||
Type | Reference(Appointment|CommunicationRequest|DeviceRequest|MedicationRequest|NutritionOrder|Task|ServiceRequest|VisionPrescription|RequestGroup) | ||
Summary | false | ||
Requirements | Details in a form consistent with other applications and contexts of use. | ||
Comments | Standard extension exists (resource-pertainsToGoal) that allows goals to be referenced from any of the referenced resources in CarePlan.activity.reference. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
35. CarePlan.activity.detail | |||
Definition | A simple summary of a planned activity suitable for a general care plan system (e.g. form driven) that doesn't know about specific resources such as procedure etc. | ||
Control | 10..1 This element is affected by the following invariants: cpl-3 | ||
Type | BackboneElement | ||
Summary | false | ||
Requirements | Details in a simple form for generic care plan systems. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
36. CarePlan.activity.detail.modifierExtension | |||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||
Control | 0..* | ||
Type | Extension | ||
Is Modifier | true | ||
Summary | true | ||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||
Alternate Names | extensions, user content, modifiers | ||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||
37. CarePlan.activity.detail.kind | |||
Definition | A description of the kind of resource the in-line definition of a care plan activity is representing. The CarePlan.activity.detail is an in-line definition when a resource is not referenced using CarePlan.activity.reference. For example, a MedicationRequest, a ServiceRequest, or a CommunicationRequest. | ||
Control | 0..01 | ||
Binding | The codes SHALL be taken from CarePlanActivityKind Resource types defined as part of FHIR that can be represented as in-line definitions of a care plan activity. | ||
Type | code | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | May determine what types of extensions are permitted. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
38. CarePlan.activity.detail.instantiatesCanonical | |||
Definition | The URL pointing to a FHIR-defined protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan activity. | ||
Control | 0..0* | ||
Type | canonical(PlanDefinition|ActivityDefinition|Questionnaire|Measure|OperationDefinition) | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | Allows Questionnaires that the patient (or practitioner) should fill in to fulfill the care plan activity. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
39. CarePlan.activity.detail.instantiatesUri | |||
Definition | The URL pointing to an externally maintained protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan activity. | ||
Control | 0..0* | ||
Type | uri | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | Allows Questionnaires that the patient (or practitioner) should fill in to fulfill the care plan activity. | ||
Comments | This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
40. CarePlan.activity.detail.code | |||
Definition | Detailed description of the type of planned activity; e.g. what lab test, what procedure, what kind of encounter. | ||
Control | 10..1 | ||
Binding | For example codes, see ProcedureCodes(SNOMEDCT) Detailed description of the type of activity; e.g. What lab test, what procedure, what kind of encounter. | ||
Type | CodeableConcept | ||
Summary | false | ||
Requirements | Allows matching performed to planned as well as validation against protocols. | ||
Comments | Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
41. CarePlan.activity.detail.code.coding | |||
Definition | A reference to a code defined by a terminology system. | ||
Control | 10..* | ||
Type | Coding | ||
Summary | true | ||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
| ||
42. CarePlan.activity.detail.code.coding:level2 | |||
SliceName | level2 | ||
Definition | A reference to a code defined by a terminology system. | ||
Control | 10..1* | ||
Binding | The codes SHALL be taken from FSIIICareInterventionsFor codes, see (unbound) | ||
Type | Coding | ||
Summary | true | ||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
43. CarePlan.activity.detail.code.coding:level2.system | |||
Definition | The identification of the code system that defines the meaning of the symbol in the code. | ||
Control | 10..1 | ||
Type | uri | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Need to be unambiguous about the source of the definition of the symbol. | ||
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. | ||
Pattern Value | urn:oid:1.2.208.176.2.21 | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
44. CarePlan.activity.detail.code.coding:level3 | |||
SliceName | level3 | ||
Definition | Shall contain locally defined code if it is a locally defined level 3 intervention A reference to a code defined by a terminology system. | ||
Control | 0..1* | ||
Type | Coding | ||
Must Support | true | ||
Summary | true | ||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
45. CarePlan.activity.detail.code.coding:level3.system | |||
Definition | The identification of the code system that defines the meaning of the symbol in the code. | ||
Control | 10..1 | ||
Type | uri | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Need to be unambiguous about the source of the definition of the symbol. | ||
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. | ||
Pattern Value | http://fhir.kl.dk/gateway/CodeSystem/LocallyDefinedInterventions | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
46. CarePlan.activity.detail.code.coding:level3.code | |||
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). | ||
Control | 10..1 | ||
Type | code | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | true | ||
Requirements | Need to refer to a particular code in the system. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
47. CarePlan.activity.detail.code.coding:level3.display | |||
Definition | A representation of the meaning of the code in the system, following the rules of the system. | ||
Control | 10..1 | ||
Type | string | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Obligations |
| ||
Summary | true | ||
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
48. CarePlan.activity.detail.reasonCode | |||
Definition | Provides the rationale that drove the inclusion of this particular activity as part of the plan or the reason why the activity was prohibited. | ||
Control | 0..0* | ||
Binding | For example codes, see SNOMEDCTClinicalFindings Identifies why a care plan activity is needed. Can include any health condition codes as well as such concepts as "general wellness", prophylaxis, surgical preparation, etc. | ||
Type | CodeableConcept | ||
Summary | false | ||
Comments | This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
49. CarePlan.activity.detail.reasonReference | |||
Definition | Reason for this intervention. Must contain all conditions known to be addressed by this intervention Indicates another resource, such as the health condition(s), whose existence justifies this request and drove the inclusion of this particular activity as part of the plan. | ||
Control | 0..* | ||
Type | Reference(KLGatewayCareCondition|Condition|Observation|DiagnosticReport|DocumentReference) : {b} | ||
Must Support | true | ||
Summary | false | ||
Comments | Conditions can be identified at the activity level that are not identified as reasons for the overall plan. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
50. CarePlan.activity.detail.goal | |||
Definition | Internal reference that identifies the goals that this activity is intended to contribute towards meeting. | ||
Control | 0..0* | ||
Type | Reference(Goal) | ||
Summary | false | ||
Requirements | So that participants know the link explicitly. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
51. CarePlan.activity.detail.status | |||
Definition | Shall be either unknown, entered-in-error, or the activity status of the intervention at the time of reporting Identifies what progress is being made for the specific activity. | ||
Control | 1..1 | ||
Binding | The codes SHALL be taken from CarePlanActivityStatus Codes that reflect the current state of a care plan activity within its overall life cycle. | ||
Type | code | ||
Is Modifier | true | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | Indicates progress against the plan, whether the activity is still relevant for the plan. | ||
Comments | Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
52. CarePlan.activity.detail.statusReason | |||
Definition | Provides reason why the activity isn't yet started, is on hold, was cancelled, etc. | ||
Control | 0..01 | ||
Type | CodeableConcept | ||
Summary | false | ||
Comments | Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
53. CarePlan.activity.detail.doNotPerform | |||
Definition | If true, indicates that the described activity is one that must NOT be engaged in when following the plan. If false, or missing, indicates that the described activity is one that should be engaged in when following the plan. | ||
Control | 0..01 | ||
Type | boolean | ||
Is Modifier | true | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | Captures intention to not do something that may have been previously typical. | ||
Comments | This element is labeled as a modifier because it marks an activity as an activity that is not to be performed. | ||
Meaning if Missing | If missing indicates that the described activity is one that should be engaged in when following the plan. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
54. CarePlan.activity.detail.scheduled[x] | |||
Definition | The period, timing or frequency upon which the described activity is to occur. | ||
Control | 0..01 | ||
Type | Choice of: Timing, Period, string | ||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Requirements | Allows prompting for activities and detection of missed planned activities. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
55. CarePlan.activity.detail.location | |||
Definition | Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc. | ||
Control | 0..01 | ||
Type | Reference(Location) | ||
Summary | false | ||
Requirements | Helps in planning of activity. | ||
Comments | May reference a specific clinical location or may identify a type of location. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
56. CarePlan.activity.detail.performer | |||
Definition | Identifies who's expected to be involved in the activity. | ||
Control | 0..0* | ||
Type | Reference(Practitioner|PractitionerRole|Organization|RelatedPerson|Patient|CareTeam|HealthcareService|Device) | ||
Summary | false | ||
Requirements | Helps in planning of activity. | ||
Comments | A performer MAY also be a participant in the care plan. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
57. CarePlan.activity.detail.product[x] | |||
Definition | Identifies the food, drug or other product to be consumed or supplied in the activity. | ||
Control | 0..01 | ||
Binding | For example codes, see SNOMEDCTMedicationCodes A product supplied or administered as part of a care plan activity. | ||
Type | Choice of: CodeableConcept, Reference(Medication|Substance) | ||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||
Summary | false | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
58. CarePlan.activity.detail.dailyAmount | |||
Definition | Identifies the quantity expected to be consumed in a given day. | ||
Control | 0..01 | ||
Type | Quantity(SimpleQuantity) | ||
Summary | false | ||
Requirements | Allows rough dose checking. | ||
Alternate Names | daily dose | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
59. CarePlan.activity.detail.quantity | |||
Definition | Identifies the quantity expected to be supplied, administered or consumed by the subject. | ||
Control | 0..01 | ||
Type | Quantity(SimpleQuantity) | ||
Summary | false | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
60. CarePlan.activity.detail.description | |||
Definition | This provides a textual description of constraints on the intended activity occurrence, including relation to other activities. It may also include objectives, pre-conditions and end-conditions. Finally, it may convey specifics about the activity such as body site, method, route, etc. | ||
Control | 0..01 | ||
Type | string | ||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||
Summary | false | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||
61. CarePlan.note | |||
Definition | General notes about the care plan not covered elsewhere. | ||
Control | 0..0* | ||
Type | Annotation | ||
Summary | false | ||
Requirements | Used to capture information that applies to the plan as a whole that doesn't fit into discrete elements. | ||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here.
1. CarePlan | |||||
Definition | Describes the intention of how one or more practitioners intend to deliver care for a particular patient, group or community for a period of time, possibly limited to care for a specific condition or set of conditions. | ||||
Control | 0..* | ||||
Summary | false | ||||
Alternate Names | Care Team | ||||
2. CarePlan.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Control | 0..1 | ||||
Type | id | ||||
Summary | true | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
3. CarePlan.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
4. CarePlan.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
5. CarePlan.language | |||||
Definition | The base language in which the resource is written. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages
A human language
| ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
6. CarePlan.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
7. CarePlan.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
8. CarePlan.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on CarePlan.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
9. CarePlan.extension:followUpEncounter | |||||
SliceName | followUpEncounter | ||||
Definition | Encounter for following up on this intervention. Must be present if a follow-up date is known | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(KLGatewayCareFollowUpEncounterExtension) (Extension Type: Reference(KLGatewayCareEncounter) : {b}) | ||||
Must Support | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
10. CarePlan.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
11. CarePlan.identifier | |||||
Definition | Business identifiers assigned to this care plan by the performer or other systems which remain constant as the resource is updated and propagates from server to server. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..0 | ||||
Type | Identifier | ||||
Summary | true | ||||
Requirements | Allows identification of the care plan as it is known by various participating systems and in a way that remains consistent across servers. | ||||
Comments | This is a business identifier, not a resource identifier (see discussion). It is best practice for the identifier to only appear on a single resource instance, however business practices may occasionally dictate that multiple resource instances with the same identifier can exist - possibly even with different resource types. For example, multiple Patient and a Person resource instance might share the same social insurance number. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
12. CarePlan.instantiatesCanonical | |||||
Definition | The URL pointing to a FHIR-defined protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan. | ||||
Control | 0..0 | ||||
Type | canonical(PlanDefinition|Questionnaire|Measure|ActivityDefinition|OperationDefinition) | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
13. CarePlan.instantiatesUri | |||||
Definition | The URL pointing to an externally maintained protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan. | ||||
Control | 0..0 | ||||
Type | uri | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
14. CarePlan.basedOn | |||||
Definition | A care plan that is fulfilled in whole or in part by this care plan. | ||||
Control | 0..0 | ||||
Type | Reference(CarePlan) | ||||
Summary | true | ||||
Requirements | Allows tracing of the care plan and tracking whether proposals/recommendations were acted upon. | ||||
Alternate Names | fulfills | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
15. CarePlan.replaces | |||||
Definition | Completed or terminated care plan whose function is taken by this new care plan. | ||||
Control | 0..0 | ||||
Type | Reference(CarePlan) | ||||
Summary | true | ||||
Requirements | Allows tracing the continuation of a therapy or administrative process instantiated through multiple care plans. | ||||
Alternate Names | supersedes | ||||
Comments | The replacement could be because the initial care plan was immediately rejected (due to an issue) or because the previous care plan was completed, but the need for the action described by the care plan remains ongoing. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
16. CarePlan.partOf | |||||
Definition | A larger care plan of which this particular care plan is a component or step. | ||||
Control | 0..0 | ||||
Type | Reference(CarePlan) | ||||
Summary | true | ||||
Comments | Each care plan is an independent request, such that having a care plan be part of another care plan can cause issues with cascading statuses. As such, this element is still being discussed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
17. CarePlan.status | |||||
Definition | Shall be either unknown, entered-in-error, or the status of the intervention at the time of reporting | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from RequestStatus Indicates whether the plan is currently being acted upon, represents future intentions or is now a historical record | ||||
Type | code | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Allows clinicians to determine whether the plan is actionable or not. | ||||
Comments | The unknown code is not to be used to convey other statuses. The unknown code should be used when one of the statuses applies, but the authoring system doesn't know the current state of the care plan. This element is labeled as a modifier because the status contains the code entered-in-error that marks the plan as not currently valid. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
18. CarePlan.intent | |||||
Definition | Indicates the level of authority/intentionality associated with the care plan and where the care plan fits into the workflow chain. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from CarePlanIntent Codes indicating the degree of authority/intentionality associated with a care plan | ||||
Type | code | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Proposals/recommendations, plans and orders all use the same structure and can exist in the same fulfillment chain. | ||||
Comments | This element is labeled as a modifier because the intent alters when and how the resource is actually applicable. | ||||
Pattern Value | plan | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
19. CarePlan.category | |||||
Definition | Identifies what "kind" of plan this is to support differentiation between multiple co-existing plans; e.g. "Home health", "psychiatric", "asthma", "disease management", "wellness plan", etc. | ||||
Control | 0..0 | ||||
Binding | For example codes, see CarePlanCategory Identifies what "kind" of plan this is to support differentiation between multiple co-existing plans; e.g. "Home health", "psychiatric", "asthma", "disease management", etc | ||||
Type | CodeableConcept | ||||
Summary | true | ||||
Requirements | Used for filtering what plan(s) are retrieved and displayed to different types of users. | ||||
Comments | There may be multiple axes of categorization and one plan may serve multiple purposes. In some cases, this may be redundant with references to CarePlan.concern. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
20. CarePlan.title | |||||
Definition | Human-friendly name for the care plan. | ||||
Control | 0..0 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
21. CarePlan.description | |||||
Definition | A description of the scope and nature of the plan. | ||||
Control | 0..0 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Provides more detail than conveyed by category. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
22. CarePlan.subject | |||||
Definition | Identifies the patient or group whose intended care is described by the plan. | ||||
Control | 1..1 | ||||
Type | Reference(KLGatewayCareCitizen) : {b} | ||||
Summary | true | ||||
Alternate Names | patient | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
23. CarePlan.encounter | |||||
Definition | The Encounter during which this CarePlan was created or to which the creation of this record is tightly associated. | ||||
Control | 0..0 | ||||
Type | Reference(Encounter) | ||||
Summary | true | ||||
Comments | This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. CarePlan activities conducted as a result of the care plan may well occur as part of other encounters. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
24. CarePlan.period | |||||
Definition | Indicates when the plan did (or is intended to) come into effect and end. | ||||
Control | 1..1 | ||||
Type | Period | ||||
Summary | true | ||||
Requirements | Allows tracking what plan(s) are in effect at a particular time. | ||||
Alternate Names | timing | ||||
Comments | Any activities scheduled as part of the plan should be constrained to the specified period regardless of whether the activities are planned within a single encounter/episode or across multiple encounters/episodes (e.g. the longitudinal management of a chronic condition). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
25. CarePlan.period.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
26. CarePlan.period.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on CarePlan.period.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
27. CarePlan.period.start | |||||
Definition | The start of the period. The boundary is inclusive. | ||||
Control | 1..1 This element is affected by the following invariants: per-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | If the low element is missing, the meaning is that the low boundary is not known. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
28. CarePlan.period.end | |||||
Definition | The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. | ||||
Control | 0..1 This element is affected by the following invariants: per-1 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03. | ||||
Meaning if Missing | If the end of the period is missing, it means that the period is ongoing | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
29. CarePlan.created | |||||
Definition | Represents when this particular CarePlan record was created in the system, which is often a system-generated date. | ||||
Control | 0..0 | ||||
Type | dateTime | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Alternate Names | authoredOn | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
30. CarePlan.author | |||||
Definition | When populated, the author is responsible for the care plan. The care plan is attributed to the author. | ||||
Control | 0..0 | ||||
Type | Reference(Patient|Practitioner|PractitionerRole|Device|RelatedPerson|Organization|CareTeam) | ||||
Summary | true | ||||
Comments | The author may also be a contributor. For example, an organization can be an author, but not listed as a contributor. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
31. CarePlan.contributor | |||||
Definition | Identifies the individual(s) or organization who provided the contents of the care plan. | ||||
Control | 0..0 | ||||
Type | Reference(Patient|Practitioner|PractitionerRole|Device|RelatedPerson|Organization|CareTeam) | ||||
Summary | false | ||||
Comments | Collaborative care plans may have multiple contributors. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
32. CarePlan.careTeam | |||||
Definition | Identifies all people and organizations who are expected to be involved in the care envisioned by this plan. | ||||
Control | 0..0 | ||||
Type | Reference(CareTeam) | ||||
Summary | false | ||||
Requirements | Allows representation of care teams, helps scope care plan. In some cases may be a determiner of access permissions. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
33. CarePlan.addresses | |||||
Definition | Identifies the conditions/problems/concerns/diagnoses/etc. whose management and/or mitigation are handled by this plan. | ||||
Control | 0..0 | ||||
Type | Reference(Condition) | ||||
Summary | true | ||||
Requirements | Links plan to the conditions it manages. The element can identify risks addressed by the plan as well as active conditions. (The Condition resource can include things like "at risk for hypertension" or "fall risk".) Also scopes plans - multiple plans may exist addressing different concerns. | ||||
Comments | When the diagnosis is related to an allergy or intolerance, the Condition and AllergyIntolerance resources can both be used. However, to be actionable for decision support, using Condition alone is not sufficient as the allergy or intolerance condition needs to be represented as an AllergyIntolerance. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
34. CarePlan.supportingInfo | |||||
Definition | Identifies portions of the patient's record that specifically influenced the formation of the plan. These might include comorbidities, recent procedures, limitations, recent assessments, etc. | ||||
Control | 0..0 | ||||
Type | Reference(Resource) | ||||
Summary | false | ||||
Requirements | Identifies barriers and other considerations associated with the care plan. | ||||
Comments | Use "concern" to identify specific conditions addressed by the care plan. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
35. CarePlan.goal | |||||
Definition | Describes the intended objective(s) of carrying out the care plan. | ||||
Control | 0..0 | ||||
Type | Reference(Goal) | ||||
Summary | false | ||||
Requirements | Provides context for plan. Allows plan effectiveness to be evaluated by clinicians. | ||||
Comments | Goal can be achieving a particular change or merely maintaining a current state or even slowing a decline. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
36. CarePlan.activity | |||||
Definition | Identifies a planned action to occur as part of the plan. For example, a medication to be used, lab tests to perform, self-monitoring, education, etc. | ||||
Control | 1..1 | ||||
Type | BackboneElement | ||||
Summary | false | ||||
Requirements | Allows systems to prompt for performance of planned activities, and validate plans against best practice. | ||||
37. CarePlan.activity.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
38. CarePlan.activity.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
39. CarePlan.activity.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
40. CarePlan.activity.outcomeCodeableConcept | |||||
Definition | Identifies the outcome at the point when the status of the activity is assessed. For example, the outcome of an education activity could be patient understands (or not). | ||||
Control | 0..0 | ||||
Binding | For example codes, see CarePlanActivityOutcome Identifies the results of the activity | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Comments | Note that this should not duplicate the activity status (e.g. completed or in progress). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
41. CarePlan.activity.outcomeReference | |||||
Definition | Details of the outcome or action resulting from the activity. The reference to an "event" resource, such as Procedure or Encounter or Observation, is the result/outcome of the activity itself. The activity can be conveyed using CarePlan.activity.detail OR using the CarePlan.activity.reference (a reference to a “request” resource). | ||||
Control | 0..0 | ||||
Type | Reference(Resource) | ||||
Summary | false | ||||
Requirements | Links plan to resulting actions. | ||||
Comments | The activity outcome is independent of the outcome of the related goal(s). For example, if the goal is to achieve a target body weight of 150 lbs and an activity is defined to diet, then the activity outcome could be calories consumed whereas the goal outcome is an observation for the actual body weight measured. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
42. CarePlan.activity.progress | |||||
Definition | Notes about the adherence/status/progress of the activity. | ||||
Control | 0..0 | ||||
Type | Annotation | ||||
Summary | false | ||||
Requirements | Can be used to capture information about adherence, progress, concerns, etc. | ||||
Comments | This element should NOT be used to describe the activity to be performed - that occurs either within the resource pointed to by activity.detail.reference or in activity.detail.description. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
43. CarePlan.activity.reference | |||||
Definition | The details of the proposed activity represented in a specific resource. | ||||
Control | 0..0 This element is affected by the following invariants: cpl-3 | ||||
Type | Reference(Appointment|CommunicationRequest|DeviceRequest|MedicationRequest|NutritionOrder|Task|ServiceRequest|VisionPrescription|RequestGroup) | ||||
Summary | false | ||||
Requirements | Details in a form consistent with other applications and contexts of use. | ||||
Comments | Standard extension exists (resource-pertainsToGoal) that allows goals to be referenced from any of the referenced resources in CarePlan.activity.reference. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
44. CarePlan.activity.detail | |||||
Definition | A simple summary of a planned activity suitable for a general care plan system (e.g. form driven) that doesn't know about specific resources such as procedure etc. | ||||
Control | 1..1 This element is affected by the following invariants: cpl-3 | ||||
Type | BackboneElement | ||||
Summary | false | ||||
Requirements | Details in a simple form for generic care plan systems. | ||||
45. CarePlan.activity.detail.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
46. CarePlan.activity.detail.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
47. CarePlan.activity.detail.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
48. CarePlan.activity.detail.kind | |||||
Definition | A description of the kind of resource the in-line definition of a care plan activity is representing. The CarePlan.activity.detail is an in-line definition when a resource is not referenced using CarePlan.activity.reference. For example, a MedicationRequest, a ServiceRequest, or a CommunicationRequest. | ||||
Control | 0..0 | ||||
Binding | The codes SHALL be taken from CarePlanActivityKind Resource types defined as part of FHIR that can be represented as in-line definitions of a care plan activity | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | May determine what types of extensions are permitted. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
49. CarePlan.activity.detail.instantiatesCanonical | |||||
Definition | The URL pointing to a FHIR-defined protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan activity. | ||||
Control | 0..0 | ||||
Type | canonical(PlanDefinition|ActivityDefinition|Questionnaire|Measure|OperationDefinition) | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Allows Questionnaires that the patient (or practitioner) should fill in to fulfill the care plan activity. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
50. CarePlan.activity.detail.instantiatesUri | |||||
Definition | The URL pointing to an externally maintained protocol, guideline, questionnaire or other definition that is adhered to in whole or in part by this CarePlan activity. | ||||
Control | 0..0 | ||||
Type | uri | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Allows Questionnaires that the patient (or practitioner) should fill in to fulfill the care plan activity. | ||||
Comments | This might be an HTML page, PDF, etc. or could just be a non-resolvable URI identifier. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
51. CarePlan.activity.detail.code | |||||
Definition | Detailed description of the type of planned activity; e.g. what lab test, what procedure, what kind of encounter. | ||||
Control | 1..1 | ||||
Binding | For example codes, see ProcedureCodes(SNOMEDCT) Detailed description of the type of activity; e.g. What lab test, what procedure, what kind of encounter | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Requirements | Allows matching performed to planned as well as validation against protocols. | ||||
Comments | Tends to be less relevant for activities involving particular products. Codes should not convey negation - use "prohibited" instead. | ||||
52. CarePlan.activity.detail.code.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
53. CarePlan.activity.detail.code.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
54. CarePlan.activity.detail.code.coding | |||||
Definition | A reference to a code defined by a terminology system. | ||||
Control | 1..* | ||||
Type | Coding | ||||
Summary | true | ||||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.coding. The slices are unordered and Closed, and can be differentiated using the following discriminators:
| ||||
55. CarePlan.activity.detail.code.coding:level2 | |||||
SliceName | level2 | ||||
Definition | A reference to a code defined by a terminology system. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from FSIIICareInterventions | ||||
Type | Coding | ||||
Summary | true | ||||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
56. CarePlan.activity.detail.code.coding:level2.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
57. CarePlan.activity.detail.code.coding:level2.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
58. CarePlan.activity.detail.code.coding:level2.system | |||||
Definition | The identification of the code system that defines the meaning of the symbol in the code. | ||||
Control | 1..1 | ||||
Type | uri | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to be unambiguous about the source of the definition of the symbol. | ||||
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. | ||||
Pattern Value | urn:oid:1.2.208.176.2.21 | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
59. CarePlan.activity.detail.code.coding:level2.version | |||||
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. | ||||
Note | This is a business versionId, not a resource version id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
60. CarePlan.activity.detail.code.coding:level2.code | |||||
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). | ||||
Control | 0..1 | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to refer to a particular code in the system. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
61. CarePlan.activity.detail.code.coding:level2.display | |||||
Definition | A representation of the meaning of the code in the system, following the rules of the system. | ||||
Control | 0..1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Obligations |
| ||||
Summary | true | ||||
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
62. CarePlan.activity.detail.code.coding:level2.userSelected | |||||
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. | ||||
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
63. CarePlan.activity.detail.code.coding:level3 | |||||
SliceName | level3 | ||||
Definition | Shall contain locally defined code if it is a locally defined level 3 intervention | ||||
Control | 0..1 | ||||
Type | Coding | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
64. CarePlan.activity.detail.code.coding:level3.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
65. CarePlan.activity.detail.code.coding:level3.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on CarePlan.activity.detail.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
66. CarePlan.activity.detail.code.coding:level3.system | |||||
Definition | The identification of the code system that defines the meaning of the symbol in the code. | ||||
Control | 1..1 | ||||
Type | uri | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to be unambiguous about the source of the definition of the symbol. | ||||
Comments | The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously. | ||||
Pattern Value | http://fhir.kl.dk/gateway/CodeSystem/LocallyDefinedInterventions | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
67. CarePlan.activity.detail.code.coding:level3.version | |||||
Definition | The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. | ||||
Note | This is a business versionId, not a resource version id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Comments | Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
68. CarePlan.activity.detail.code.coding:level3.code | |||||
Definition | A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). | ||||
Control | 1..1 | ||||
Type | code | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Need to refer to a particular code in the system. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
69. CarePlan.activity.detail.code.coding:level3.display | |||||
Definition | A representation of the meaning of the code in the system, following the rules of the system. | ||||
Control | 1..1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Obligations |
| ||||
Summary | true | ||||
Requirements | Need to be able to carry a human-readable meaning of the code for readers that do not know the system. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
70. CarePlan.activity.detail.code.coding:level3.userSelected | |||||
Definition | Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays). | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. | ||||
Comments | Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
71. CarePlan.activity.detail.code.text | |||||
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. | ||||
Control | 0..1 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Obligations |
| ||||
Summary | true | ||||
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. | ||||
Comments | Very often the text is the same as a displayName of one of the codings. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
72. CarePlan.activity.detail.reasonCode | |||||
Definition | Provides the rationale that drove the inclusion of this particular activity as part of the plan or the reason why the activity was prohibited. | ||||
Control | 0..0 | ||||
Binding | For example codes, see SNOMEDCTClinicalFindings Identifies why a care plan activity is needed. Can include any health condition codes as well as such concepts as "general wellness", prophylaxis, surgical preparation, etc | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Comments | This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonCondition instead. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
73. CarePlan.activity.detail.reasonReference | |||||
Definition | Reason for this intervention. Must contain all conditions known to be addressed by this intervention | ||||
Control | 0..* | ||||
Type | Reference(KLGatewayCareCondition) : {b} | ||||
Must Support | true | ||||
Summary | false | ||||
Comments | Conditions can be identified at the activity level that are not identified as reasons for the overall plan. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
74. CarePlan.activity.detail.goal | |||||
Definition | Internal reference that identifies the goals that this activity is intended to contribute towards meeting. | ||||
Control | 0..0 | ||||
Type | Reference(Goal) | ||||
Summary | false | ||||
Requirements | So that participants know the link explicitly. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
75. CarePlan.activity.detail.status | |||||
Definition | Shall be either unknown, entered-in-error, or the activity status of the intervention at the time of reporting | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from CarePlanActivityStatus Codes that reflect the current state of a care plan activity within its overall life cycle | ||||
Type | code | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Indicates progress against the plan, whether the activity is still relevant for the plan. | ||||
Comments | Some aspects of status can be inferred based on the resources linked in actionTaken. Note that "status" is only as current as the plan was most recently updated. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
76. CarePlan.activity.detail.statusReason | |||||
Definition | Provides reason why the activity isn't yet started, is on hold, was cancelled, etc. | ||||
Control | 0..0 | ||||
Type | CodeableConcept | ||||
Summary | false | ||||
Comments | Will generally not be present if status is "complete". Be sure to prompt to update this (or at least remove the existing value) if the status is changed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
77. CarePlan.activity.detail.doNotPerform | |||||
Definition | If true, indicates that the described activity is one that must NOT be engaged in when following the plan. If false, or missing, indicates that the described activity is one that should be engaged in when following the plan. | ||||
Control | 0..0 | ||||
Type | boolean | ||||
Is Modifier | true | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Captures intention to not do something that may have been previously typical. | ||||
Comments | This element is labeled as a modifier because it marks an activity as an activity that is not to be performed. | ||||
Meaning if Missing | If missing indicates that the described activity is one that should be engaged in when following the plan. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
78. CarePlan.activity.detail.scheduled[x] | |||||
Definition | The period, timing or frequency upon which the described activity is to occur. | ||||
Control | 0..0 | ||||
Type | Choice of: Timing, Period, string | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Allows prompting for activities and detection of missed planned activities. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
79. CarePlan.activity.detail.location | |||||
Definition | Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc. | ||||
Control | 0..0 | ||||
Type | Reference(Location) | ||||
Summary | false | ||||
Requirements | Helps in planning of activity. | ||||
Comments | May reference a specific clinical location or may identify a type of location. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
80. CarePlan.activity.detail.performer | |||||
Definition | Identifies who's expected to be involved in the activity. | ||||
Control | 0..0 | ||||
Type | Reference(Practitioner|PractitionerRole|Organization|RelatedPerson|Patient|CareTeam|HealthcareService|Device) | ||||
Summary | false | ||||
Requirements | Helps in planning of activity. | ||||
Comments | A performer MAY also be a participant in the care plan. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
81. CarePlan.activity.detail.product[x] | |||||
Definition | Identifies the food, drug or other product to be consumed or supplied in the activity. | ||||
Control | 0..0 | ||||
Binding | For example codes, see SNOMEDCTMedicationCodes A product supplied or administered as part of a care plan activity | ||||
Type | Choice of: CodeableConcept, Reference(Medication|Substance) | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
82. CarePlan.activity.detail.dailyAmount | |||||
Definition | Identifies the quantity expected to be consumed in a given day. | ||||
Control | 0..0 | ||||
Type | Quantity(SimpleQuantity) | ||||
Summary | false | ||||
Requirements | Allows rough dose checking. | ||||
Alternate Names | daily dose | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
83. CarePlan.activity.detail.quantity | |||||
Definition | Identifies the quantity expected to be supplied, administered or consumed by the subject. | ||||
Control | 0..0 | ||||
Type | Quantity(SimpleQuantity) | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
84. CarePlan.activity.detail.description | |||||
Definition | This provides a textual description of constraints on the intended activity occurrence, including relation to other activities. It may also include objectives, pre-conditions and end-conditions. Finally, it may convey specifics about the activity such as body site, method, route, etc. | ||||
Control | 0..0 | ||||
Type | string | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
85. CarePlan.note | |||||
Definition | General notes about the care plan not covered elsewhere. | ||||
Control | 0..0 | ||||
Type | Annotation | ||||
Summary | false | ||||
Requirements | Used to capture information that applies to the plan as a whole that doesn't fit into discrete elements. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |