Implementation Guide for FFB messaging (FFB udvekslingsdatasæt)
1.0.0 - release Denmark flag

This page is part of the KLFFBMessaging (v1.0.0: Release) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Data Type Profile: KLMessagingFFBEANIdentifier - Detailed Descriptions

Active as of 2023-08-27

Definitions for the kl-messaging-ffb-eanIdentifier data type profile.

Guidance on how to interpret the contents of this table can be found here

0. Identifier
2. Identifier.system
Control1..?
Must Supporttrue
Pattern Valueurn:oid:1.3.88
4. Identifier.value
Control1..?
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Identifier
Definition

An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

ShortAn identifier intended for computation
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. Identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Valueurn:oid:1.3.88
Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Identifier
Definition

An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

ShortAn identifier intended for computation
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. Identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. Identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators: , and can be differentiated using the following discriminators:
  • value @ url
6. Identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse: Identifies the purpose for this identifier, if known .
Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes: A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Valueurn:oid:1.3.88
Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))